SKU: 87294663177

NGK Spark Plug for Renault - B8EG

$125.93 $139.92
Save 10%
No.2 Bestseller on duoplus.be >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 13 - Jul 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

NGK Spark Plug for Renault - B8EGVehicle Fitment & Part Details This NGK spark plug (B8EG) is supplied as an OEM grade replacement. Heat range 8. Thread M14 x 1,25. Verify VIN engine before ordering. Key Details SKU B8EG Component Spark Plug Brand NGK Heat Range 8 Part MPN 3430 GTIN Barcode 087295134306 Trade Numbers B8EG Product Specifications Thread Size M14 x 1,25 Thread Length [mm] 19,0 Spanner Size 20,8 mm Spark Position [mm] 1,0 Electrode Construction Unscrewable SAE connector,

Vehicle Fitment & Part Details

This NGK spark plug (B8EG) is supplied as an OEM-grade replacement. Heat range 8. Thread M14 x 1,25. Verify VIN/engine before ordering.

Key Details

SKU
B8EG
Component
Spark Plug
Brand
NGK
Heat Range
8
Part MPN
3430
GTIN / Barcode
087295134306
Trade Numbers
B8EG

Product Specifications

Thread Size
M14 x 1,25
Thread Length [mm]
19,0
Spanner Size
20,8 mm
Spark Position [mm]
1,0
Electrode / Construction
Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat
Brand Class
Premium

Vehicle Compatibility

Common fitments include Renault (18, FUEGO). Always confirm the correct heat range and electrode design for your specific engine variant by VIN before ordering.

OEM Reference Numbers

Vehicle OE Numbers

  • Honda: 98079 58648, 98079 58678
  • Kawasaki: 9207 01222, E 9207 01222
  • Lexus: 90098 25305, 90098 74013
  • Toyota: 90098 74013, 90098 25305
  • Yamaha: 94702 00323, 94703 00323, 94701 00323

Aftermarket Equivalents

  • Champion: N62R, N87, N60R
  • Denso: W24ESV, W25EN, 4034
  • Magneti Marelli: CW 10 L
  • Valeo: H 33 RG
Alternate OEM Search References: 9807958648, 9807958678, 920701222, E920701222, 9009825305, 9009874013

Fitment Notes

  • Always match heat range, thread size and electrode design before ordering. Verify VIN/engine.

Important: Spark plugs are not returnable, exchangeable, or refundable once fitted. Confirm you are ordering the correct part for your vehicle. Compare the new spark plug to the removed plug for thread reach, thread diameter, hex size, electrode style, gap specification, and heat range before fitting. Mismatched spark plugs can cause misfires, pre-ignition, detonation, fouling, or engine damage.

Returns Notice: Once a spark plug has been fitted or threaded into a cylinder head, it cannot be returned, exchanged, or refunded under any circumstances.

Installation / Use / Maintenance Tips

  • Allow the engine to cool fully before removal - cylinder heads are easily damaged when warm.
  • Use the correct deep-socket plug spanner (20,8 mm) and avoid impact tools.
  • Inspect the existing plug for fouling, oil contamination, or worn electrodes - may indicate engine condition issues.
  • Verify the gap if your supplied plug is not factory-set; consult your service manual for the correct value.
  • Apply a small amount of anti-seize to the threads (sparingly) and torque to manufacturer specification.

Common Questions

Will this NGK spark plug fit my Renault?
This part (B8EG) is listed for the applications shown on this page. Always confirm the correct heat range, thread size and electrode design against your vehicle's service manual or a parts lookup before ordering. Verify VIN/engine.

What does the NGK part code mean?
The NGK trade number encodes physical and performance characteristics - thread/reach, electrode design, heat rating, and projection. Each digit and letter has meaning in NGK's naming convention. The heat range is usually the standalone digit (e.g. BPR6ES is heat range 6).

What is the difference between this NGK plug and a Bosch / Champion / Denso equivalent?
The cross-references listed under OEM Reference Numbers are functionally equivalent for the same applications, but materials, electrode design and heat dissipation can differ slightly. NGK is OEM-supply quality and most manufacturers specify NGK or Denso as their factory plug.

How do I confirm fitment if my engine variant isn't listed?
Match the supplied thread size, reach, electrode design and heat range against your existing plug. If unsure, request fitment assistance before ordering.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 87294663177

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 492 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ReluctantConsumer
Pawtucket, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Dallas, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
J
Verified Purchase
Joshua McPheron
New York, US
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
C
Verified Purchase
Courtney
Belleville, US
★★★★★ 5
Would buy again!!!
Color: Dark Grey, Size: 7 Seat
⭐️⭐️⭐️⭐️⭐️ Perfect Couch for Comfort, Space, and Style! I couldn’t be happier with my purchase of the SUAWY 108 Inch Sectional Sleeper. From the moment it arrived, I knew I made the right choice. Setup was straightforward, and the couch feels incredibly sturdy and well-built. The fabric is soft to the touch yet durable enough to handle everyday use, which is perfect for both lounging and having guests over. The size is exactly what I was looking for — spacious enough to seat a large group comfortably without feeling cramped. Whether I’m relaxing after work, having friends over, or stretching out for a nap, it provides more than enough room. The chaise and sleeper function are real game changers. The pull-out sleeper is surprisingly supportive and comfortable — not at all like the thin, saggy mattresses I’ve experienced with other sofa beds. My guests have all commented on how well they slept! I also love the storage space built into the sectional. It’s so convenient for keeping extra blankets, pillows, or even board games tucked away neatly. This design makes it feel like the couch was made with real-life use in mind, not just looks. Speaking of looks, the style is modern and clean, and it blends perfectly into my living room. The neutral tone makes it easy to decorate around, and it honestly makes the whole room look more put-together. Overall, this sectional sleeper has completely exceeded my expectations. It’s comfortable, practical, stylish, and worth every penny. If you’re on the fence, don’t hesitate — this is absolutely one of the best furniture investments I’ve made. I’m genuinely so happy every time I sit down on it, and I highly recommend it to anyone looking for a large, versatile sectional.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2025
P
Verified Purchase
patrick
Boise, US
★★★★★ 4
An okay sectional
Color: Dark Grey, Size: 5 Seat, Color: Dark Grey, Size: 5 Seat
I want to give my honest review of this couch. One significant difference in the actual couch vs the photos here is the back of the couch is actually much thinner than in the photos. It’s made with metal framing that is very thin covered in fabric with no sort of padding. Also, the back of the couch does not angle back far. Which makes the couch pretty uncomfortable, as your back is up at almost a 90 degree angle. The quality of the couch overall is good. It was easy to assemble and I didn’t really run into any issues in that regard. Like others have said. The cushions are quite thin and also not super soft. The couch is also quite low to the ground, so if you’re looking for that oversized super soft couch, this probably isn’t the one. I do love the pull out bed/chaise which is super nice, ans the storage is great too. For the cost of the couch I think the quality and comfort are good. I don’t love it, I don’t hate it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2026

recommand products

Republic_Day
500.00
Gloria Button Accent Pants (Olive)
39.53
Sankranthi
500.00
xTune Buick LaCrosse 10-13 Driver Side LED Tail Light - OEM L ALT-JH-BLAC10-OE-L - 9938979
149.00
HKS Stem-seal set RB26DETT - 22999-AN004
135.00