MREK™ 1003 Automatic Meter Console

MREK™ 1003 Automatic Meter ConsoleDescription Versatile metering console (Metric English) for use in most sampling trains. Specifications Material Measurements: Meets or exceeds requirements of relevant texts methods requirements. Dry gas meter: Accurate to 1. 5% in the range of 0. 0042m3 min to 0. 0417m3 min 0. 7L per revolution with 7cc resolution Working temperature of 25C to 55C Digital manometer: 0 to 400 mmH2O (0 to 15. 75 inH2O) scale Resolution: 0. 2 mmH2O (0. 01 inH2O)

Description

Versatile metering console (Metric/English) for use in most sampling trains. 

Specifications/Material/Measurements:

Meets or exceeds requirements of relevant texts/methods/requirements.

Dry gas meter:
Accurate to ±1.5% in the range of 0.0042m3/min to 0.0417m3/min
0.7L per revolution with 7cc resolution
Working temperature of -25ºC to 55ºC

Digital manometer:
0 to 400 mmH₂O (0 to 15.75 inH₂O) scale
Resolution: 0.2 mmH₂O (0.01 inH₂O)

Temperature control:
Via Aer Sampling interface

Temperature sensor:
Type K
-210ºC to 1800ºC output in 0.01ºC resolution

Vacuum gage:
Range: 0 to 100kPa (0 to 29.53 inHg)
Resolution 0.2 kPa (0.04 inHg)

Barometer:
Range: 375 to 825 mmHg
Resolution: 0.02 mmHg (0.0005 inHg)

Umbilical connections:
Pitot line: 1/4" quick connects
Sample line: 1/2" quick connects
Electrical: 5 conductors circular connector
Thermocouple: Type K, standard

Power: 220-240V/50Hz or 100-127V/60Hz

Communication:
USB or wireless interface with dedicate software

Dimensions:
Length: 32cm (~13 in)
Depth/Width: 28cm (~11 in)
Height: 33cm (~13 in)
Weight: 10.40kg (~23 lbs)

Purpose and how to use? Relationship to other products?

The MREK^TM 1003 Automatic Meter Console is where all the sensors/gages/meters are housed in. These sensors/gages/meters measure temperatures, differential pressures, vacuum, gas velocities and all other required parameters to sample flue gas isokinetically.

The MREK^TM 1003 Automatic Meter Console is metric and is most suitable for USEPA (United States of America, Environmental Protection Agency) methods/procedures/requirements although it usually fulfills requirements from other jurisdictions as well.

Just connect the MREK^TM 1003 Automatic Meter Console to other component products to start sampling. Please refer to the definition of "sample line" as stated below to know what are those other components

Relevant texts/methods/requirements:

Section 6.1.1.9 (Metering System), USEPA Method 5
Page 3-14 (Meter Box Construction), APTD-0581: Construction Details of Isokinetic Source Sampling Equipment
Section 6.2.7 (Gas-metering devices), ISO 9096:2003(E)

Additional ordering/shipping procedures:

Pump and items needed (Critical Orifice Set, Thermocouple Simulator, Angle Indicator and Bull's Eye Level) for you to calibrate the MREK^TM 1003 Automatic Meter Console sold separately.

The following certificates/reports will be issued:

Calibration certificate for dry gas meter (Y) and orifice meter/tube (∆H@)
Calibration certificate for temperature sensor

Sampling Lines:

Pitot line refers to the products needed to measure differential pressure (∆P): MREK^TM 1003 Automatic Meter Console, Umbilical Cord, Combination Probe Set/Sheath

Sample line means those products where the sampled flue gas from the stack/chimney comes into contact with:

Standard Configuration: MREK^TM 1003 Automatic Meter Console, Umbilical Cord, various glassware including Filter Holder, MKOR^TM Heater Box and Combination Probe Set.

Flexible Configuration: MREK^TM 1003 Automatic Meter Console, Umbilical Cord, various glassware including Filter Holder, MKOR^TM Heater Box, Unheated Sampling Line (Flexible) and Combination Probe Set.

Handy Configuration: MREK^TM 1003 Automatic Meter Console, Umbilical Cord, various glassware, Kris^TM Heater (Handy), Unheated Sampling Line (Handy) and Combination Probe Set.

Sample line products are also the same as those used when measuring moisture content by condensation.

Additional leak checks reports will be issued only when the Sampling Method Set purchased includes all the required component products.

Please refer to the FAQs page for shipping and other charges.

--

Information presented here is subjected to Aer Sampling Group's terms and conditions.
Doc ID: AERHQWW-pn-1138-en
Last revised (Excluding prices): 0; 01.10.19