Zoyi Dual-Channel Oscilloscope ZT-703S Multifunction Multimeter Signal Generator 3-in-1 High Precision

Zoyi Dual-Channel Oscilloscope ZT-703S Multifunction Multimeter Signal Generator 3-in-1 High PrecisioniProGadgets Repair Tools Zoyi Dual Channel Oscilloscope ZT 703S Multifunction Multimeter Signal Generator 3 in 1 High Precision Features: 3 in 1 oscilloscope multimeter signal generator, 50MHz dual channel, 280MS s sampling rate, 128K storage depth, persistence mode One key auto adjustment function, precise measurement of waveform parameters with accurate cursors 3. 5 inch TFT high definition color screen, the screen readings are clear and the visual

• 3-in-1 oscilloscope multimeter signal generator, 50MHz dual channel, 280MS/s sampling rate, 128K storage depth, persistence mode
• One-key auto adjustment function, precise measurement of waveform parameters with accurate cursors
• 3.5-inch TFT high-definition color screen,  the screen readings are clear and the visual colors are more vibrant
• Dual channel 50MHz bandwidth, signal comparison for better problem analysis and judgment
• Arbitrary waveform, measurement and display, various waveform measurements to meet your daily needs
• Persistence mode captures signals more effectively leaving no room for escape from abnormal waveforms
• Signal generators provide a variety of frequency and waveform outputs
• Press and hold the SAVE button for 2 seconds to save a screenshot, allowing you to view the full-screen image and perform secondary analysis on the saved waveform data. You can also connect it to a computer via a USB data cable to retrieve and store waveforms
• Long-lasting battery life efficient operation, 3400mAh large-capacity rechargeable battery, can be cyclically charged, worry-free and labor-saving, ultra-strong endurance, not limited by the venue

• Display (IPS): 25000 counts
• Range: Automatic/Manual
• Charge: Type-C(5V/2A)
• Battery capacity: 3400mAh lithium battery
• Support functions: Multimeter, Oscilloscope, Signal Generator
• Material: ABS+TPE
• Dimensions: 177*89*40mm
• Weight: 380g

• Bandwidth: 50MHz dual channel
• Sampling Method: Real-time sampling
• Sampling Rate: 280MSa/s
• Input Coupling: DC, AC
• Input Impedance: 1MQ, @16pf
• Attenuation: X1, X10
• Persistence Mode: Minimum, 500ms, 1S, 10S, Infinite
• Rate Range: 1.5Sa/s~280MSa/s
• Interpolation: (sinx)x
• Sweep Range: 10ns/div~20s/div
• Time Base: Accuracy 20ppm
• Record Length: Up to 128Kbyte
• Sensitivity: 20mV/div~10V/div
• Offset Range: 4 grids
• Analog Bandwidth: 50MHz
• Low-Frequency: More than 10Hz
• Rise Time: Less than 10ns
• DC Gain Accuracy: ±3%
• Auto Measurement: Period, frequency, peak-to-peak value, maximum value, minimum value, RMS, duty cycle, pulse count
• Trigger Modes: Auto, normal, single
• Trigger Edges: Rising edge, falling edge
• Signal Generator Output: Sine wave, square wave, sawtooth wave, half wave, full wave
• Operating Modes: Normal mode 200MSa/s, High-speed mode 280MSa/s
• Display Modes: YT, XY, Roll

• DC Voltage: 25.000mV~1000.0V ±(0.05%+3)
• AC Voltage: 25.000mV~750.0V  ±(0.5%+3)
• DC Current: 25.000mA~10.000A  ±(0.5%+3)
• AC Current: 25.000mA~10.000A  ±(0.8%+3)
• Resistance: 250.00Ω~250.0MΩ
• Capacitance: 9.999nF~9.99mF
• Frequency: 99.99Hz~999.9KHz
• Diode: Yes
• Continuity: Yes

• 1 x Multimeter
• 1 x Test Cable
• 1 x Oscilloscope Probes
• 1 x Type-C Cable