Dali Phantom S‑80 In‑Wall Speaker (Each)DALI Phantom S 80 In Wall Speaker at Vinyl Sound Toronto Canada The Phantom S 80 is the most compact speaker in DALI's Phantom S in wall series, designed and engineered in Hobro, Denmark and available at Vinyl Sound in Toronto, Canada. Despite its smaller footprint relative to the Phantom S 180 and S 280, it delivers the same core Phantom S technologies in a cabinet measuring just 103 mm in mounting depth: a single 8 inch EPICON derived SMC woofer

DALI Phantom S-80 In-Wall Speaker at Vinyl Sound Toronto Canada

The Phantom S-80 is the most compact speaker in DALI's Phantom S in-wall series, designed and engineered in Hobro, Denmark and available at Vinyl Sound in Toronto, Canada. Despite its smaller footprint relative to the Phantom S-180 and S-280, it delivers the same core Phantom S technologies in a cabinet measuring just 103 mm in mounting depth: a single 8-inch EPICON-derived SMC woofer with 70 percent more diaphragm area than a conventional 6.5-inch driver, and a rotatable Hybrid Tweeter module pairing a 28 mm soft dome with a 17 x 45 mm planar ribbon tweeter. Its frequency range extends from 25 Hz to 59,000 Hz at 88 dB sensitivity. The S-80's compact form makes it especially suitable as a flexible multi-position speaker in larger Phantom S installations, serving equally well as a rear surround, high-position Atmos effect speaker, or secondary front channel in rooms where the S-180 or S-280 cannot be accommodated. Sold individually, it is designed and manufactured at DALI's own production facilities in Denmark.

EPICON-Derived SMC Woofer: Full-Size Performance in a Compact Format

The Phantom S-80's single 8-inch woofer is a specially developed driver that uses the same SMC (Soft Magnetic Composite) magnet system originally created for DALI's EPICON flagship loudspeaker range. The SMC pole piece inside the ferrite magnet assembly has very high magnetic permeability and very low electrical conductivity, a combination that dramatically reduces magnetic hysteresis and eddy current distortion compared to conventional magnet motor designs. The 8-inch cone diameter gives the driver 70 percent more diaphragm surface area than a standard 6.5-inch woofer found in most in-wall speakers at this price level, producing significantly more air displacement at low frequencies for higher output capability without increased mechanical stress. A four-layer 1.5-inch voice coil is surrounded by aluminium rings for optimal control, low distortion, and high power handling. The cone, low-loss rubber surround, and spider are all optimised for wide bandwidth midrange reproduction alongside bass performance, making the S-80 a genuinely full-range driver without a dedicated midrange unit.

Rotatable Hybrid Tweeter Module with Inverted Driver Layout

The Phantom S-80 uses DALI's signature Hybrid Tweeter module, combining a 28 mm soft dome tweeter with a 17 x 45 mm planar ribbon tweeter on a precision-machined aluminium faceplate. Both driver elements are free of resonances and high-Q peaks within their operating bandwidths. The soft dome handles frequencies from 2,800 Hz upward with low resonant frequency, high power handling, and exceptional dynamic headroom, while the ribbon element extends coverage smoothly from 15,000 Hz upward with superior horizontal dispersion in the uppermost frequencies. A key installation-specific design decision in the S-80 is the inverted driver layout: the Hybrid Tweeter module is placed at the bottom of the enclosure rather than the top, which allows the speaker to be mounted higher on the wall at a conventional TV-adjacent height while keeping the ribbon tweeter at ear level. The dome tweeter is also rotated within the module to optimise its phase relationship with the woofer and improve bass integration with the room. The complete module is rotatable for correct horizontal dispersion when the speaker is installed in landscape orientation as a centre channel.

Solid MDF Cabinet and Wide Dispersion Engineering

The Phantom S-80 enclosure is built from solid MDF, providing a rigid, acoustically inert platform for the woofer and eliminating panel resonance at the 103 mm mounting depth. At this cabinet size, DALI engineered the internal volume precisely to provide the correct acoustic environment for the 8-inch woofer without additional depth. An extruded aluminium frame integrates the speaker cleanly with the wall surface, and the magnet-mounted front grille provides a minimal visual presence. The grille is paintable to match any wall finish. A dogleg clamp mounting system secures the speaker to the wall without specialist tools, and a cut-out template is included. DALI's wide dispersion design philosophy ensures that the S-80's sound is distributed broadly throughout the room rather than narrowly on-axis, which is critical for a flush-mounted speaker where the listener's position cannot be controlled. The even energy distribution produced by the off-axis optimisation of both the woofer and the Hybrid Tweeter module creates a consistent, high-quality listening experience across a wide range of seating positions.

Key Features

• 8-inch EPICON-Derived SMC Woofer: Specially developed driver using the EPICON flagship SMC magnet system. Provides 70 percent more diaphragm area than a 6.5-inch woofer. Four-layer 1.5-inch voice coil with aluminium rings for low distortion and high power handling.
• Rotatable Hybrid Tweeter Module: Combines a 28 mm soft dome with a 17 x 45 mm planar ribbon tweeter on an aluminium faceplate. Both elements free of resonances and high-Q peaks within their operating bandwidths. Fully rotatable for centre channel horizontal installation.
• Inverted Driver Layout for TV-Adjacent Installation: Hybrid Tweeter module positioned at the bottom of the enclosure. Allows higher wall mounting height aligned with large televisions while keeping the ribbon tweeter at ear level. Dome tweeter rotated for optimum woofer-to-tweeter phase coherence.
• Patented SMC Magnet System: Originally developed for the DALI EPICON series. Dramatically reduces hysteresis and eddy current distortion for a lower-coloration, more detailed midrange and bass character.
• 103 mm Mounting Depth: Compact solid MDF cabinet engineered for the correct internal woofer volume at this depth. Fits into almost any standard domestic wall cavity without modification.
• Wide Dispersion Design: Off-axis optimised driver placement and crossover design ensure consistent tonal balance and uniform energy distribution across a wide listening area. Direct and reflected sound both benefit from the same high-quality off-axis response.
• Extruded Aluminium Frame with Magnetic Grille: Elegant aluminium surround integrates cleanly with the wall surface. Magnet-mounted grille attaches without visible fixings and is fully paintable for invisible installation.
• Flexible Multi-Position Compatibility: Compact size makes the S-80 suitable for front, surround, rear, or high-position Atmos effect speaker roles within larger Phantom S multi-channel installations.
• 6-ohm Nominal Impedance: Easy and stable load for a wide range of custom install amplifiers and AV receivers.

Technical Specifications

Frequently Asked Questions

What is the DALI Phantom S-80?

The DALI Phantom S-80 is the most compact speaker in DALI's Phantom S in-wall series, designed and engineered in Hobro, Denmark. It is a two-and-a-half-way custom installation speaker featuring a single 8-inch EPICON-derived SMC wood fibre woofer and a rotatable Hybrid Tweeter module combining a 28 mm soft dome and a 17 x 45 mm planar ribbon tweeter, all housed in a solid MDF cabinet with a 103 mm mounting depth. It achieves a frequency range of 25 Hz to 59,000 Hz at 88 dB sensitivity and is sold individually for use as a stereo pair, surround speaker, or high-position Atmos effect speaker in multi-channel custom installations.

How does the DALI Phantom S-80 compare to the Phantom S-180 and Phantom M-375?

The Phantom S-80 is the entry point to DALI's premium Phantom S series, sharing the EPICON-derived SMC magnet system and Hybrid Tweeter module with the larger S-180 and S-280 models, but using a single 8-inch woofer without a passive radiator. Compared to the S-180, the S-80 is physically smaller, has a lower maximum SPL of 108 dB versus 109 dB, and does not include the 10-inch carbon fibre passive radiator from the DALI SUB P-10 DSS that gives the S-180 its extended bass reinforcement. Compared to the Phantom M-375, the S-80 uses the full EPICON-derived SMC magnet system and the same Hybrid Tweeter module, making it a step up in driver technology over the M series, but in a more compact form factor than the M-375. The S-80's smaller cut-out makes it ideal for positions where the S-180 footprint cannot be accommodated.

Can the DALI Phantom S-80 be used as a centre channel speaker?

Yes, the DALI Phantom S-80 can be used as a centre channel in multi-channel home cinema systems. When installed horizontally in landscape orientation, the Hybrid Tweeter module should be rotated so that the ribbon tweeter element is positioned as close to ear height as possible and maintains its correct vertical orientation for optimal horizontal high-frequency dispersion. DALI recommends placing the ribbon tweeter at ear height in all S-80 installations, which is why the speaker uses an inverted driver layout with the tweeter module at the bottom. In a horizontal centre channel installation, careful positioning of the ribbon element ensures consistent tonal balance across the full horizontal listening width in front of the screen.

Why is the Phantom S-80's driver layout inverted compared to a conventional speaker?

DALI deliberately placed the Hybrid Tweeter module at the bottom of the Phantom S-80 enclosure rather than the top as a practical installation solution. Because the ribbon tweeter should be at ear height for optimal performance, placing the tweeter at the bottom allows the entire speaker to be mounted higher on the wall at a conventional TV-adjacent position, rather than requiring it to be installed very low where the tweeter would be at ear height but the speaker would be awkwardly positioned below a television. DALI also rotated the dome tweeter within the module so that it faces toward the woofer above, optimising the physical distance and phase relationship between the dome and the woofer cone for the best acoustic summation at the crossover point and improved bass integration with the room.

Where can I buy the DALI Phantom S-80 in Toronto or Canada?

The DALI Phantom S-80 is available at Vinyl Sound, an authorised DALI dealer in Toronto, Canada. Vinyl Sound carries the full DALI Phantom S and M series and can assist with system design, cut-out planning, amplifier matching, and multi-channel layout consultation for custom installation projects. Purchasing from an authorised Canadian dealer ensures full DALI manufacturer warranty coverage and access to experienced local support throughout the installation process.

What amplifier works well with the DALI Phantom S-80?

The DALI Phantom S-80 is rated for 40 to 200 watts at a 6-ohm nominal impedance. Its 88 dB sensitivity is slightly lower than the S-180 and S-280, meaning it benefits from amplifiers at the middle to upper end of its power range for larger rooms. AV receivers and custom install amplifiers from brands such as Arcam, Anthem, NAD, and Denon with 6-ohm rated outputs in the 80 to 150 watt per channel range are well matched. In multi-channel installations where the S-80 serves as a surround or height speaker, it can be powered from a multi-channel amplifier alongside the larger Phantom S speakers, provided all channels receive adequate power within the 40 to 200 watt recommended range.

What is the difference between the DALI Phantom S-80 and the Phantom H-80?

The Phantom S-80 and Phantom H-80 both use an 8-inch woofer in a compact in-wall format, but they belong to different product families with different engineering approaches. The S-80 uses the EPICON-derived SMC magnet system and the Hybrid Tweeter module with a planar ribbon element, placing it in DALI's premium Phantom S tier with the same core technology as the S-180 and S-280. The Phantom H-80 belongs to the Phantom H series, which uses conventional double-magnet motor technology and a single soft dome tweeter without a ribbon element, in an open-back enclosure requiring a suitable wall cavity volume. The S-80 is the better match for installations requiring the Hybrid Tweeter's wide dispersion and ribbon-element high-frequency extension, while the H-80 is suited to installations prioritising maximum bass output from a conventional open-back design.